Oscilloscope Accessories

Shock-absorbent EVA protection with adjustable dividers and mesh pockets keeps F115C, F116C, F117C meters and accessories organized. Slim, lightweight case with a sturdy handle, yellow and black design, water resistant storage box for job sites. Case only.

Aproca Hard Case protects your FNIRSI LCR-P1 with a compact, travel-ready shell. Durable EVA material, precise fit, hand strap, mesh pocket for small parts, and dual zippers. Lightweight and eco-friendly—note: case only, accessories shown are not included.

Kingsung hard case provides rugged, portable protection for Klein MM400/MM325 and Fluke 117/116/101 meters. Built with tough EVA, it guards against dings and moisture, while foam cutouts and zip pockets keep the meter, leads, and accessories organized and ready.

The Hantek HT30A Auto Test Cables provide a 3-meter BNC to banana adapter for flexible oscilloscope testing away from the vehicle. Fully shielded to reduce noise, they pair with attenuators for safe, accurate automotive signal measurements.

Reliable 50-ohm BNC jumper cable designed for low-loss RF signal transfer between BNC devices in mobile and stationary setups. Ideal for CB, HAM, two-way radios, police scanners, patch panels, rack mounts, with a flexible 2 m reach for dashboards and labs.

LonixPower's AC/DC adapter replaces the charger for Owon handheld DSOs HDS2061M, HDS3101M, and HDS3102M. It features universal 100-240V input, a 5-foot cord, and built-in over-current, over-voltage, and short-circuit protections for safe, professional use.

Power up with LonixPower’s AC/DC adapter for the OWON HDS1021M handheld oscilloscope and multimeter. Reliable, compact, and safe, it fits on the go with a long cord and robust protection for durable, dependable charging in any workspace.

LonixPower replacement AC/DC adapter delivers reliable, safe power for Tektronix 222, 222PS, and PowerScout handheld systems. It features long-life efficiency, over-current/over-voltage protection, and a 9-foot cord for flexible setup in lab or field use.

POENVFPO EVSE Tester Adapter provides safe, accurate diagnostics for Type 2 sockets, works with multimeters and oscilloscopes, features LED phase indicators, and supports quick checks by simulating vehicle states and currents without an EV. Durable, IP54 housing for field use.

Renew your oscilloscope with a TENAGE replacement battery designed for long-lasting power and peak performance. Fits HC-PDS, PDS5022, PDS602 and compatible models, with Li-ion cells, built-in safety protections, and a 12-month warranty plus 24/7 support.

NDUSSF's 7.4V battery replacement powers BK Precision oscilloscopes with reliable Li-Polymer cells for stable, long-lasting energy. Easy to install, fits securely, and minimizes downtime while supporting demanding measurements. Includes a 365-day warranty and dedicated support.

Arazi Battery Replacement for BK Precision BP5210 and 2510–2516 oscilloscope models. This OEM-compatible battery delivers dependable, high-capacity power, easy installation, and built-in protection for safe, portable operation in the lab or field.

Powerful replacement battery designed for GW Instek GDS-122 Series oscilloscopes, delivering reliable, ready-to-use operation in field or lab. Safe, long-lasting, plug-and-play installation minimizes downtime, with compact, lightweight design and strong warranty support for confidence in critical measurements.

High-performance NDUSSF battery replacement for Owon MSO series, delivering reliable power and extended field operation. 7.4V Li-ion cells for safety and rapid recharge, with built-in protection against over-charge, over-discharge, overheating, over-current, and shorts. 365-day warranty.

NDUSSF replacement battery provides reliable power for Owon B-8000 and HC-PDS oscilloscopes. Designed for long-lasting operation with built-in protections, it delivers steady performance through extended measurement sessions. Easy to install, durable, travel-friendly, and backed by a 365-day warranty.

Upgrade your oscilloscope with a reliable NDUSSF battery replacement built for select models like Owon B-8000. Provides long-lasting Li-ion power with safety protections, easy installation, and a 365-day warranty for dependable performance and reduced downtime.

Power your Tektronix oscilloscope with our NDUSSF replacement battery. Designed for long-lasting Ni-MH performance, it delivers dependable runtime for THS730A, THS710, THS710A, THS720 and THS720A. Includes over-charge and short-circuit protection with a 365-day warranty.

Reliable ARAZI battery replacement powers a range of Owon PDS oscilloscopes, delivering consistent energy with smart safety features to prevent overheating and overcharging. Lightweight, compact design for easy swap, backed by warranty and quality control for critical testing.

Long-lasting IUPPA replacement battery powers Peaktech 1360 and compatible models. Quick swap-in across P-series oscilloscopes ensures smooth project flow. Built for safety and longevity with quality chemistry, lightweight design, and reliable output for accurate measurements.

Premium IUPPA replacement battery designed for long-lasting power across AMC and OX oscilloscopes. 3600mAh at 9.6V provides extended measurement sessions, with built-in protection against overcharge, short circuit, and thermal issues. Lightweight, compact, and easy field swaps.

Experience longer measurement sessions with the 6800mAh high-capacity battery designed for SIGLENT SHS806 oscilloscope. This compact Li-ion polymer pack fits securely, offers smart energy management, and delivers safe, reliable performance in the field or lab.

Power your Micsig STO1104C with a reliable 10000mAh Li-ion polymer battery designed for long-lasting performance. This 0-cycle replacement delivers fresh capacity, with built-in protection for safe charging and discharging, while its compact design minimizes downtime in field or studio setups.

A compact, user-friendly BNC to 4mm banana plug adapter for precise oscilloscope readings. Streamlines attaching BNC plugs to test terminals, with rugged construction, 500V rating, and lightweight portability for field or lab use.

Hyuduo HT18A gator clips are fully insulated and provide safe, secure connections for electronics testing. They feature red and black color coding, versatile clamping for various wire sizes, and a compact, lightweight design ideal for oscilloscope work and lab experiments.